SS Sheet Dealers in Ahmedabad: Jindal Stainless MoU Partner
Relinox Stainless ranks among the genuine ss sheet dealers in ahmedabad. It's an MoU partner of Jindal Stainless, shipping JSL-melted flat products to Ahmedabad and across Gujarat from its Delhi base at Ajmeri Gate. Every dispatch carries a mill test certificate (MTC). Buyers searching for stainless steel sheet suppliers ahmedabad or stainless steel dealers in ahmedabad find the full range here: every grade, including 304, 316, 316L, 202 and the wider Jindal lineup, supplied as sheet, plate, coil, patta and circle. Ahmedabad's mix of chemical, pharma, dyes-and-pigments and textile-engineering industries shapes demand: 316 and 316L dominate corrosion-critical work, while 304 covers general fabrication. For jindal stainless steel sheet ahmedabad, this authorized channel delivers genuine JSL-melted material, not re-rolled bazaar stock. Send your requirement on the RFQ form and get today's rate along with an MTC.
Written by the Relinox Technical Team, Jindal Stainless MoU Partner, based at 699, 1st Floor, Gali Kundewalan, Ajmeri Gate, Delhi 110006.
Supplying stainless steel sheets in Ahmedabad
Fabricators, OEMs and traders across Ahmedabad source the full Jindal flat-product range through us. Those working in chemicals, dyes-and-pigments and pharma equipment specify 316 / 316L for wetted, corrosion-critical vessels and ducting. Kitchen-equipment, tank and general engineering workshops reach for 304 in 2B and No.4 finishes. Textile-machinery and appliance makers rely on 304 alongside ferritic 430 / 409M. Dairy and food-processing lines, a genuine Gujarat strength, need 304 / 316 food-contact sheet. Cost-sensitive furniture, signage and utensil work runs on 202, J4 and 204Cu. As an ss sheet supplier in ahmedabad we keep that whole span on one counter, so a buyer doesn't have to split an order across three traders.
| Product form | Typical Ahmedabad demand | Product page |
|---|---|---|
| Sheets (2B, BA, No.4, hairline, mirror) | Chemical / pharma equipment, kitchen equipment, fabrication | SS sheets |
| Plates (hot-rolled) | Chemical / process-plant fabrication, heavy structures | SS plates |
| Coils (CR & HR) | Deep-draw, slitting, appliance and OEM work | SS coils |
| Patta / patti (slit strips) | Trims, clamps, small-component fabrication | SS patta / patti |
| Circles | Cookware, vessels, tank ends | SS circles |
| Perforated & designer (job-work) | Screens, facades, PVD / mirror interiors | Perforated · PVD colour |
Ahmedabad's stainless market & industries
Ahmedabad's metal and hardware trade has clustered for years around the old-city markets near Jamalpur and Rakhial, while industrial consumption of stainless spreads across the city's GIDC estates. Vatva, Naroda, Odhav and Kathwada GIDC house the chemical, dyes-and-pigments and engineering belts. West of the city, Sanand has grown into the automotive and general-manufacturing hub. Further out, the region stretches into the Chhatral, Kadi industrial corridor to the north. We name these estates only where we're certain, and we hold no local premises in any of them. The material is genuine Jindal, dispatched from Delhi.
In Vatva, Naroda and Odhav, chemical, dye-intermediate and pharma units specify 316 and 316L for reactors, tanks, ducting and wetted equipment. Acid and chloride exposure there rules out 304. Ahmedabad's large textile-machinery and general-engineering base runs mostly on 304, with ferritic 430 and 409M covering appliance panels, trims and exhaust-type components. Gujarat's dairy and food-processing lines, well known across the state, want 304 / 316 food-contact sheet in 2B and No.4. Sanand's automotive cluster draws on 304 and ferritic grades for body, trim and structural parts. Signage, lift cabins, cladding, furniture: architectural and interior work across the city uses 304 and 202 in No.4, hairline, mirror and PVD finishes. Cost-sensitive furniture, utensil and signage work, by contrast, leans on 202, J4 and 204Cu.
How supply from Delhi works
All material moves by road from our Ajmeri Gate base in Delhi (699, 1st Floor, Gali Kundewalan, Ajmeri Gate, Delhi 110006) to Ahmedabad. The distance is roughly 950 km, so a fair road transit runs 2–4 days, depending on the transporter, the load and how well the finish is protected. Part-loads get consolidated with other dispatches; full loads go direct. We quote freight ex-Delhi or freight-to-pay, confirmed on the RFQ, and edge-protect sheets for finish-sensitive orders. Every dispatch comes with a mill test certificate linking the material to JSL-melted heat and grade, plus a proper GST tax invoice on each sale. There's no branch, godown or showroom of ours in Ahmedabad. What you get instead is genuine Jindal stock held in Delhi and delivered straight to your site or workshop in Ahmedabad.
| Item | How it works |
|---|---|
| Dispatch origin | Ajmeri Gate stock point, Delhi (no local Ahmedabad premises) |
| Road transit | Typically 2–4 days by road (~950 km), per transporter and load |
| Freight | Ex-Delhi or freight-to-pay, confirmed on the RFQ |
| Documents | Mill test certificate + GST tax invoice with every dispatch |
| Cut-to-size | Shearing / cut-to-size and PVD, mirror & perforation as job-work on Jindal base |
Grades & products Ahmedabad buys most
Ahmedabad runs on chemical, pharma, dairy and engineering work, and that mix drives grade choice here. The table below maps each of the city's main industries to a recommended grade and finish. Composition and mechanical values follow standard published data under ASTM A240 and IS 6911, confirmed on the MTC. We don't restate them here.
| Ahmedabad industry | Recommended grade / finish | Grade page |
|---|---|---|
| Chemical, dyes & pharma plants (Vatva, Naroda, Odhav) | 316 / 316L, 2B | SS 316 · 316L |
| Dairy & food processing | 304 / 316, 2B / No.4 | SS 304 · 316 |
| Textile machinery & general engineering | 304, 2B / No.4 | SS 304 |
| Automotive & appliances (Sanand) | 430 / 409M (ferritic); 304 | 430 · 409M |
| Architecture, signage & interiors | 304, No.4 / hairline / PVD | SS 304 · mirror finish |
| Furniture, trims & utensils | 202 / J4 / 204Cu | SS 202 · Jindal J4 |
A set of grades stays off routine stock and moves only against indent or on request: 317L, 304H, 321H, 301LN, 444, duplex 2304, super duplex 2507 and JSLU DD/SD. Put the specification on your RFQ and we'll confirm availability against indent. Picking the right grade is often the harder part. The SS 304 vs 316 guide walks through the corrosion decision that most chemical and pharma buyers in Ahmedabad face, and the full grades chart lists the range.
Why buy from an MoU partner vs local bazaar stock
Relinox holds an authorized MoU partnership with Jindal Stainless Limited (JSL). Not Jindal SAW, not JSW Steel, not Jindal Steel & Power, and not a SAIL or Salem distributor either. Those are separate companies, mostly carbon steel and pipes. We deal in stainless flat products only. And in a market flooded with re-rolled, mixed-origin sheet, that distinction isn't trivial.
- Genuine JSL-melted material, bought through an authorized channel. The origin is something your MTC can actually prove, not unverified bazaar stock.
- Mill test certificates with every dispatch, showing grade and conformance to ASTM A240 / IS 6911. Ask for a sample copy against your indent.
- One source, full grade range: austenitic, ferritic, 200-series / J-series, and duplex 2205. A mixed Ahmedabad order ships together on a single invoice.
- Honest logistics: genuine Delhi stock, clear road transit and freight, a GST tax invoice. No inflated claims about a local branch.
Sub-dealers and resellers across Gujarat can raise a dealer pricing enquiry on the same RFQ. For national rate benchmarks, check the current SS sheet price list; this page confirms the delivered Ahmedabad figure on request.
SS 304 / 316 price in Ahmedabad
Stainless is priced ex-Delhi and lands in Ahmedabad with freight added, there is no separate "Ahmedabad rate," only the Delhi band plus honest transport. Current indicative bands (CR 2B sheet): SS 304 ₹185–250/kg · SS 316 ₹280–360/kg · SS 202 ₹135–180/kg, thickness-wise tables on the 304, 316 and 202 price pages. Indicative Delhi market ranges, reviewed October 2026, rates move daily with nickel; confirm today's exact rate on RFQ. Send your Ahmedabad delivery location with the enquiry and the quote comes freight-included.
Frequently asked questions
Who are the genuine ss sheet dealers in Ahmedabad for Jindal material?
Relinox Stainless partners with Jindal Stainless Limited (JSL) under an MoU. We ship genuine JSL-melted sheets, plates, coils, patta and circles out to Ahmedabad, straight from our Delhi base at Ajmeri Gate. Every shipment carries its own mill test certificate.
What is the delivery time to Ahmedabad?
Material ships by road from Delhi, a distance of roughly 950 km. Transit typically runs 2–4 days, though it depends on the transporter, the load and how well the finish is protected. Confirm the current lead time for your grade and quantity on the RFQ.
Do you have a branch or stock in Ahmedabad?
No, we don't keep an office, branch or warehouse in Ahmedabad. Stock sits at our Ajmeri Gate base in Delhi and ships from there to your Ahmedabad site or workshop. That's what keeps the material genuine Jindal, with the origin traceable on the MTC.
Which grades do Ahmedabad buyers order most?
316 and 316L handle the chemical, dye and pharma work. Textile machinery, dairy equipment and general fabrication run on 304. Automotive and appliance parts call for the ferritic grades 430 and 409M. Furniture, signage and utensils are cost-sensitive, so that's where 202, J4 and 204Cu come in. Check the grades chart for details.
Can I get cut-to-size or PVD sheet delivered to Ahmedabad?
Yes. We handle shearing and cut-to-size work, perforation, and designer finishes such as mirror, PVD colour, etched and embossed, all done as job-work on Jindal base and dispatched with the order. Just send your drawing or size list along with the RFQ.
How do I verify the sheet is genuine Jindal?
Our Jindal Stainless MoU-partner authorization, together with the MTC, ties the sheet straight back to JSL-melted heat and grade. Re-rolled bazaar stock simply can't match that. See our guide to identifying real SS 304.
What is the minimum order for Ahmedabad?
Order quantity and freight hinge on grade, size, and whether you're booking a part-load or a full load, check the RFQ against your indent to confirm. Part-loads get consolidated with other despatches heading to Ahmedabad. Full loads go direct.
Do you give a GST invoice for Ahmedabad orders?
Yes. We issue a proper GST tax invoice on every sale, and our GSTIN is 07AAYFR6664H1ZD. The e-way bill for the Delhi-to-Gujarat movement gets sorted at dispatch.
Related links
- We carry stainless steel sheets, plates, coils, patta / patti, and circles.
- Need grade details? Here's the grades chart, or jump straight to SS 304, SS 316, SS 316L, and SS 202. The SS 304 vs 316 guide lays out the differences, and pricing lives on the current price list.
- For coverage and trust, see stainless steel in Gujarat, our Delhi (Ajmeri Gate) dealer, and the Jindal Stainless MoU partnership. We back every order with quality & mill test certificates, request a quote with MTC and see for yourself.
Get today's rate
Send your requirement once, we reply the same working day with today's rate, availability and dispatch time. Mill test certificate with every dispatch. GST invoice on every sale.