Stainless Steel Dealers in Gujarat: Jindal Stainless MoU Partner

Relinox Stainless ranks among Gujarat's authorized stainless steel dealers, an MoU partner of Jindal Stainless. We ship genuine JSL-melted flat products to every district of the state from our Delhi base at Ajmeri Gate, with a mill test certificate (MTC) on every dispatch.

Buyers can check this directly as an ss sheet supplier gujarat, and enquiries for a jindal stainless distributor gujarat come straight to us. We supply the full Jindal range: 304, 304L, 316, 316L, 316Ti, 321, 439, 430, 420, 202, J4 and duplex 2205, in sheet, plate, coil, patta and circle form. These grades serve the state's chemical, petrochemical, pharma, dairy, engineering, ship-breaking and utensil belts along the GIDC estates. Material dispatches by road from Delhi. We keep no local branch or godown here, and the transit band stated below is an honest one.

Send your requirement on the RFQ form for today's rate with an MTC.

By the Relinox Technical Team, Jindal Stainless MoU Partner, based at 699, 1st Floor, Gali Kundewalan, Ajmeri Gate, Delhi 110006.

Stainless steel supply across Gujarat

We serve every district of Gujarat out of our Delhi stock point at Ajmeri Gate. That coverage runs from the Ahmedabad-Gandhinagar hub, with its pharma, engineering and textile base, down through the Golden Corridor's chemical and petrochemical belt covering Vadodara, Ankleshwar, Dahej and Vapi. It reaches the Saurashtra engineering and casting cluster around Rajkot, the brass-parts and refinery belt at Jamnagar, the Alang ship-breaking and plate market near Bhavnagar, and Surat, known for its textile machinery and diamonds.

Fabricators and OEMs order from us. So do chemical and pharma plants, dairies, engineering workshops, pump and casting units, utensil makers and steel traders across the state. All of them buy the same genuine Jindal flat products from one source. Each order comes invoiced on GST, backed by a mill test certificate that ties the lot back to its JSL-melted heat and grade.

For the state's main industrial cities, we've put together detailed guides covering local clusters, grade demand and delivery: our Ahmedabad stainless steel guide, Surat guide, Rajkot guide, Vadodara guide, Jamnagar guide, Bhavnagar guide and Vapi guide. Districts without a dedicated page still fall under the same served-area model: genuine Jindal stock held in Delhi, dispatched straight to your factory or site.

Gujarat's industrial profile for stainless

Gujarat holds the top spot among India's chemical and pharmaceutical states, and its stainless demand splits across a handful of well-known GIDC estates, each with its own grade profile. Take the Golden Corridor: the chemical and petrochemical belt stretching through Vapi, Ankleshwar, Panoli, Jhagadia, Dahej and Vadodara ranks among the most corrosion-critical stainless markets anywhere in the country. Reactors, heat exchangers, storage tanks, piping supports and effluent-treatment plant here call for 316L and duplex 2205. When service conditions get tougher still, customers sometimes ask for verify-list grades such as 317L, 904L-equivalent duplex and super duplex 2507 (we check these against the indent and note that 904L isn't a Jindal-rolled grade). Ahmedabad-Gandhinagar, by contrast, brings bulk pharma-formulation, API, dairy and food-processing volumes into the mix. 316L handles the product-contact surfaces there, while 304 covers the general plant. The same city also drives kitchen-equipment, interiors, signage and appliance work, all in 304, finished in PVD, mirror and etched designer styles.

Rajkot's engineering belt in Saurashtra (oil engines, submersible pumps, machine tools, castings, forging and bearing units spread across the Aji, Bhavnagar Road and Shapar-Veraval GIDCs) runs on 304 for general fabrication. Brightwork calls for 430, and shaft parts that need to hold an edge go to hardenable 410 and 420. Pump and valve makers in the same belt draw on 304 and CF-8 / CF-8M equivalent flat stock. Jamnagar is different: it houses the country's largest brass-parts cluster (brass itself isn't something we cover here) alongside refinery-town engineering work, and both lean on 304 stainless for machined and fabricated components. Bhavnagar anchors the Alang ship-recycling belt and the plate trade that comes with it. Salt and soda-ash works nearby specify 316L and duplex grades, needed for marine and chloride exposure. Surat covers a lot of ground: textile machinery, the diamond trade, dairy work through Sumul, and the nearby Morbi ceramics-machinery cluster. It pulls 304 for hygienic and machine applications, and turns to the cheaper 202, J4 and 204Cu grades for hardware and utensils. Across the state, the Amul, Banas and Sumul dairy network, along with food-processing units generally, runs on hygienic 304 and 316L. Utensil, hardware, furniture and signage work everywhere else leans on 202, J4 and 204Cu circles and sheet. We name these belts only where we're confident of the details, and we hold no local premises in any of them. The material itself is genuine Jindal, dispatched from Delhi.

Cities we serve in Gujarat

From Delhi, we reach every district in the state. The major industrial cities get their own dedicated guides, each one covering local cluster detail and honest delivery bands:

• Ahmedabad: the hub for pharma, dairy, engineering, textile, interiors and signage, with Gandhinagar close by.
• Surat, textile machinery, the diamond trade, dairy and the nearby Morbi ceramics belt.
• Rajkot, the Saurashtra oil-engine, submersible-pump, machine-tool and casting belt.
• Vadodara, the petrochemical, chemical and heavy-engineering hub on the Golden Corridor.
• Jamnagar, brass-parts machining and refinery-town engineering.
• Bhavnagar, the Alang ship-recycling and plate market with salt and soda-ash works.
• Vapi, the Vapi–Ankleshwar chemical and effluent-critical process belt.

Anand, Nadiad, Mehsana, Kutch (Gandhidham, Bhuj, Mundra), Morbi, Junagadh, Porbandar, Bharuch, Navsari, Valsad and every other district get the same treatment. There's no lateral branch claim here, only genuine Jindal stock sent from Delhi straight to your location. Check the full locations index for our other state and city guides.

Dispatch & logistics to Gujarat

All material leaves our Ajmeri Gate base in Delhi (699, 1st Floor, Gali Kundewalan, Ajmeri Gate, Delhi 110006) by road, bound for destinations across Gujarat. The state sits in the western band, so honest road transit runs about 2–3 days to Ahmedabad, Gandhinagar, Mehsana and Vadodara (roughly 900–1,000 km). Saurashtra and south Gujarat take longer: Rajkot, Jamnagar, Bhavnagar, Surat and Vapi are 3–4 days out, covering roughly 1,100–1,300 km. The exact time hinges on the transporter, the load and how the finish is protected. Part-loads get consolidated with other dispatches heading to western India, while full loads move direct. Freight is quoted ex-Delhi or freight-to-pay and gets confirmed on the RFQ. Sheets bound for finish-sensitive orders, mirror and PVD work especially, are edge-protected. Every dispatch carries a mill test certificate linking the material back to its JSL-melted heat and grade. A proper GST tax invoice goes out on each sale, and the e-way bill for the inter-state Delhi-to-Gujarat movement gets generated right along with the dispatch.

Recommended grades by Gujarat industry

Gujarat's grade choice tracks its industrial mix: chemical, petrochemical, pharma, dairy, engineering, ship-breaking and utensil manufacturing. The table below maps each of these industries to a recommended grade and finish. Composition and mechanical values come from standard published data, per ASTM A240 and IS 6911, and they're confirmed on the MTC. We don't restate them here.

A handful of grades sit outside routine stock: 317L, 304H, 321H, 301LN, 444, duplex 2304, super duplex 2507, and JSLU DD/SD. We source these against indent, or on request, so send the specification on your RFQ and we'll confirm availability against indent. 904L isn't a Jindal-rolled grade, so we don't offer it. When it comes to grade selection, the SS 304 vs 316 guide covers the corrosion decision that matters most for Gujarat's chemical, pharma, and dairy work. For welded process equipment, the SS 316 vs 316L guide explains when the low-carbon choice makes sense. The full grades chart lists everything else in the range.

Why buy from an MoU partner vs local bazaar stock

Relinox holds an authorized MoU partnership with Jindal Stainless Limited (JSL). That's not Jindal SAW, not JSW Steel, and not Jindal Steel & Power, nor is it a SAIL or Salem Steel distributorship. Those firms are separate entities, dealing mostly in carbon steel and pipes. We work with stainless flat products only. The distinction isn't a minor point: this market has plenty of re-rolled and mixed-origin sheet circulating.

• Genuine JSL-melted material through an authorized channel: origin your MTC can actually prove, not some unverified bazaar stock.
• Mill test certificates ride along with every dispatch, showing grade and conformance to ASTM A240 / IS 6911. Ask for a sample copy against your indent.
• The full grade range, from one source: austenitic, ferritic, martensitic, 200-series / J-series, and duplex 2205, so a mixed Gujarat order ships together under one invoice.
• Honest logistics: genuine Delhi stock, a straight 2–4 day western-belt road transit and freight, GST tax invoice and e-way bill. No puffed-up claims of a local branch.

Sub-dealers and resellers across the state can raise a dealer pricing enquiry on the same RFQ. Looking for a national benchmark on ss 304 sheet price per kg in gujarat? Check the dated current SS sheet price list, it confirms the delivered Gujarat figure on request.

Frequently asked questions

Related links

• We cover cities right across Gujarat, among them Ahmedabad, Surat, Rajkot, Vadodara, Jamnagar, Bhavnagar, and Vapi. See all locations for the rest.
• Our range runs from stainless steel sheets and plates to coils, patta / patti, and circles.
• Need help with grades? The grades chart is a good place to start, and there's dedicated guidance on SS 304, SS 316L, and duplex 2205. If you're weighing options, read SS 316 vs 316L or SS 304 vs 316, then check the current price list.
• On coverage and trust: our Delhi (Ajmeri Gate) dealer page, the Jindal Stainless MoU partnership, our approach to quality & mill test certificates, and how to get a quote with MTC.