Stainless Steel Suppliers in Haryana: Jindal Stainless MoU Partner

Relinox Stainless holds authorized status among stainless steel suppliers in Haryana, an MoU partner of Jindal Stainless, and it ships genuine JSL-melted flat products to every district in the state from our Delhi base at Ajmeri Gate, with a mill test certificate (MTC) on every dispatch. Buyers can verify this as an ss sheet supplier haryana, and enquiries route to us as a jindal stainless distributor haryana. We supply the full Jindal range: 304, 316, 316L, 409, 439, 430, 420, 202, J4 and duplex 2205, in sheet, plate, coil, patta and circle form, matched to the state's automotive, engineering, refinery-petrochemical, dairy-food, appliance and metal-utensil belts. Most of Haryana sits within or beside the NCR, so road transit from Delhi stays short. No local branch here, no godown. The honest transit band is stated below. Send your requirement on the RFQ form for today's rate with an MTC.

By the Relinox Technical Team, Jindal Stainless MoU Partner, based at 699, 1st Floor, Gali Kundewalan, Ajmeri Gate, Delhi 110006.

Stainless steel supply across Haryana

We serve every district of Haryana from our Delhi (Ajmeri Gate) stock point. That covers the Gurugram-Manesar-Faridabad automotive and engineering arc ringing the capital, the NH-44 corridor running up through Sonipat, Panipat and Karnal, the Hisar-Bhiwani belt to the west, and the Ambala-Yamunanagar (Jagadhri) manufacturing cluster in the north-east. Because it's right against the National Capital Region, deliveries move fast by road. Auto OEMs and component makers order from us. So do fabrication and engineering workshops, refinery and dairy plants, appliance factories, utensil and metal-ware units, and steel traders across the state. They all buy the same genuine Jindal flat products from one source, invoiced on GST, with a mill test certificate tying each lot back to its JSL-melted heat and grade.

For the state's main industrial cities, we've put together detailed guides on local clusters, grade demand and delivery: our Gurgaon stainless steel guide, Faridabad guide, Panipat guide and Hisar guide. Districts without their own page still get the same served-area treatment. Genuine Jindal stock, held in Delhi, dispatched straight to your factory or site.

Haryana's industrial profile for stainless

Haryana's stainless consumption clusters around a handful of well-known belts, and each one calls for its own grade profile. The Gurugram, Manesar arc is anchored by the state's major passenger-vehicle and two-wheeler OEMs, along with the IMT Manesar supplier network that's grown up around them; together they drive demand for ferritic 409 / 409M and 439 / 441 / 436 in exhaust systems and heat-exposed trim, 304 for general auto components and structures, and 430 for brightwork and appliance trim. The same corridor's electronics and appliance units add further demand for 304 and 202. Faridabad, one of North India's oldest and densest engineering hubs, pulls 304 for general fabrication and equipment, hot-rolled plate for structural and heavy-engineering work, and stainless more broadly across its auto-component, pump, switchgear and light-manufacturing base. Further south, the Rewari, Dharuhera, Bawal auto belt and the Rohtak IMT extend that same ferritic-and-304 automotive pattern.

The Panipat cluster, sitting along the NH-44 corridor, is the state's most corrosion-critical zone. Its refinery, petrochemical complex and fertiliser plant call for 316L and duplex 2205 in chemical process equipment, storage and piping supports. Panipat's well-known textile and home-furnishing trade adds hygienic 304 too, used in dyeing, finishing and handling equipment. Karnal, home to the national dairy-research establishment, along with the agri-and-food belt around it, runs on hygienic 304 and 316L for milk, chilling and food-contact surfaces. Further north-east, the Yamunanagar, Jagadhri cluster carries a long history in metal utensils and brass-ware; cost-sensitive 202, J4 and 204Cu circles and sheet dominate cookware and utensils there, with 304 food-grade reserved for the premium lines. Yamunanagar's sugar, paper and metal-machinery works take 304 and plate as well. Out west, Hisar is an appliance, galvanising and steel town, and it's also where Jindal Stainless runs its own stainless works. Hisar leans mostly on 304 and 430, while hardenable 420 and 410 cover wear parts across the broader engineering base there. Statewide, cost-sensitive work in utensils, hardware, furniture and signage leans on 202, J4 and 204Cu. We name these belts only where we're confident of the details, and we hold no local premises in any of them. The material is genuine Jindal, shipped out from Delhi.

Cities we serve in Haryana

We ship to every district in the state, straight from Delhi. For the major industrial cities, we've put together dedicated guides covering local cluster detail and honest delivery bands:

• Gurgaon, the Gurugram–Manesar auto, appliance and electronics belt.
• Faridabad, engineering, auto components and heavy fabrication.
• Panipat, the refinery, petrochemical, fertiliser and textile cluster.
• Hisar, appliances, galvanising and the wider western engineering base.

Sonipat, Manesar, Rohtak, Rewari, Bawal, Dharuhera, Bahadurgarh, Karnal, Yamunanagar, Jagadhri, Ambala, Bhiwani, Sirsa and Kaithal, along with every other district, get the same treatment. No lateral branch claims here, just genuine Jindal stock shipped straight from Delhi to your location. Check the full locations index for our other state and city guides.

Dispatch & logistics to Haryana

All material leaves our Ajmeri Gate base in Delhi, at 699, 1st Floor, Gali Kundewalan, Ajmeri Gate, Delhi 110006, and moves by road across Haryana. Because the state sits within and beside the NCR, transit doesn't take long. Honest road time runs same-day to next-day for the NCR ring, Gurugram, Faridabad, Sonipat, Bahadurgarh and Manesar, roughly 30–60 km, and 1–2 days for the rest of the state, places like Panipat, Karnal, Rohtak, Rewari, Hisar, Ambala and Yamunanagar, about 90–250 km. The exact time depends on the transporter, the load, and how well the finish is protected. Part-loads consolidate with other dispatches heading into Haryana; full loads go direct. Freight is quoted ex-Delhi or freight-to-pay and confirmed on the RFQ, and sheets get edge protection for finish-sensitive orders such as mirror and PVD work. Every dispatch carries a mill test certificate tying the material to its JSL-melted heat and grade. A proper GST tax invoice is raised on each sale, and the e-way bill for the inter-state Delhi-to-Haryana movement is generated with the dispatch.

Recommended grades by Haryana industry

Grade selection in Haryana follows the state's industrial mix: automotive, engineering, refinery and petrochemical, dairy and food, appliances, and metal utensils. The table below matches each of these industries to a recommended grade and finish. Composition and mechanical values follow the standard published figures in ASTM A240 and IS 6911, and they're confirmed on the MTC, so we won't repeat them here.

Verify-list grades (317L, 304H, 321H, 301LN, 444, duplex 2304, super duplex 2507 and JSLU DD/SD) aren't held as routine stock. They come against indent, or on request. Send the specification on your RFQ, and we'll confirm availability against indent. For grade selection, the SS 304 vs 316 guide covers the food-contact and corrosion decision that comes up often in Haryana's dairy, food and Panipat refinery work, the SS 202 vs 304 guide helps Jagadhri utensil and hardware buyers weigh the economy option, and the full grades chart lists the range.

Why buy from an MoU partner vs local bazaar stock

Relinox holds an authorized MoU partnership with Jindal Stainless Limited (JSL). It isn't affiliated with Jindal SAW, JSW Steel, or Jindal Steel & Power, and it doesn't distribute for SAIL or Salem Steel. Those firms operate in a different space, mostly carbon steel and pipes. We work with stainless flat products, full stop.

This distinction carries real weight in Haryana. JSL runs its own stainless works at Hisar, right there in the state, yet re-rolled and mixed-origin sheet keeps circulating through the trade regardless.

• Genuine JSL-melted material, sourced through an authorized channel: an origin your MTC can actually prove, not stock pulled from an unverified bazaar.
• Mill test certificates accompany every dispatch, showing grade and conformance to ASTM A240 / IS 6911. Ask for a sample copy against your indent if you'd like to see one first.
• Full grade range from one source: austenitic, ferritic, martensitic, 200-series / J-series, and duplex 2205. A mixed Haryana order ships together, on one invoice.
• Honest logistics. Genuine Delhi stock, straightforward same-day-to-2-day road transit and freight across the NCR belt, a GST tax invoice, and an e-way bill. No inflated claims about having a local branch.

Sub-dealers and resellers across the state can raise a dealer pricing enquiry on the same RFQ. Looking for a national benchmark on ss 304 sheet price per kg in haryana, CR or otherwise? Check the dated current SS sheet price list, it'll confirm the delivered Haryana figure if you ask.

Frequently asked questions

Related links

• We cover these Haryana cities: Gurgaon, Faridabad, Panipat, and Hisar. For the rest, check all locations.
• On the product side, we stock stainless steel sheets, plates, coils, patta / patti, and circles.
• For grades and reference material, start with the grades chart. From there, look at SS 304, SS 316L, duplex 2205, SS 409 / 409M, and SS 202. The SS 304 vs 316 guide is worth a look too, and the current price list stays current.
• As for coverage and trust: our Delhi (Ajmeri Gate) dealer location backs the Jindal Stainless MoU partnership, and every order comes with quality & mill test certificates. You can also get a quote with MTC directly.