Stainless Steel Suppliers in Assam & the Northeast: Jindal Stainless MoU Partner
Relinox Stainless ranks among the authorized stainless steel suppliers in assam and across the wider Northeast. We're an MoU partner of Jindal Stainless, and every flat product we ship to Assam and the Northeastern states is genuine JSL-melted material, dispatched from our Delhi base at Ajmeri Gate. Each dispatch carries a mill test certificate (MTC).
Buyers searching for an ss sheet supplier assam northeast can verify this directly, and enquiries for a jindal stainless distributor assam northeast come straight to us. We carry the full Jindal range: 304, 316, 316L, 321, 409, 439, 430, 420, 202, J4 and duplex 2205, available in sheet, plate, coil, patta and circle form. This lineup is matched to the region's tea, refinery-and-petroleum, pharmaceutical, food, fabrication and hospitality sectors.
Material moves by road from Delhi through the Siliguri corridor. There's no local branch or godown in the region, and we've stated the honest transit band below rather than dress it up. Send your requirement on the RFQ form for today's rate with an MTC.
By the Relinox Technical Team, Jindal Stainless MoU Partner, based at 699, 1st Floor, Gali Kundewalan, Ajmeri Gate, Delhi 110006.
Stainless steel supply across Assam & the Northeast
Our Delhi (Ajmeri Gate) stock point covers Assam and the rest of the Northeast: Meghalaya, Nagaland, Manipur, Mizoram, Tripura, Arunachal Pradesh and Sikkim. The region is anchored on the Brahmaputra valley. Guwahati's the commercial and distribution hub, Dimapur is the trading gateway into Nagaland and the eastern hills, and the tea, oil and food belts run up-valley into the Upper Assam districts. Across these states, fabricators, tea-estate engineering units, refinery and petroleum contractors, pharmaceutical plants, food processors, kitchen-equipment makers, hospitality projects and steel traders all order the same genuine Jindal flat products from one source. Each invoice carries GST, and a mill test certificate ties every lot back to its JSL-melted heat and grade.
For the region's main industrial and trading hub, we've put together a detailed guide: our Guwahati stainless steel guide covers local wholesale clusters, grade demand and delivery. Districts and states without a dedicated page still get the same served-area treatment, genuine Jindal stock held in Delhi, dispatched straight to your factory, estate or site.
| Product form | Typical Northeast demand | Product page |
|---|---|---|
| Sheets (2B, BA, No.4, hairline, mirror) | Tea-estate equipment, kitchen equipment, food plants, interiors, signage, hospitality panels | SS sheets |
| Plates (hot-rolled) | Refinery, fertilizer and process-plant fabrication; structural and tank work | SS plates |
| Coils (CR & HR) | Fabrication, appliance and general OEM slitting and pressing across Guwahati | SS coils |
| Patta / patti (slit strips) | Fasteners, clamps, hardware and general engineering | SS patta / patti |
| Circles | Utensils, cookware, tea-estate vessels and tank ends | SS circles |
| Perforated & designer (job-work) | Tea-processing screens, food-plant panels, PVD / mirror hospitality and interior work | Perforated · PVD colour |
Assam & the Northeast's industrial profile for stainless
Stainless consumption in the region clusters around a handful of well-known belts, each with its own grade profile. Assam's tea industry, the largest in India and spread across the Brahmaputra and Barak valleys, stands out as the signature consumer. It specifies food-contact 304 in 2B and No.4 for withering troughs, rollers, driers, conveyors and hygienic handling inside the estate factories. Far more demanding from a corrosion standpoint is the region's petroleum and refining belt. The refineries at Digboi, Numaligarh, Bongaigaon and Guwahati, along with their associated oil-and-gas and pipeline contractors, call for 316L and duplex 2205 in process equipment, exchangers, storage and piping supports, plus hot-rolled plate. Then there's the Namrup fertilizer and Upper Assam gas-based process cluster, which brings its own pull on 316L for corrosive chemical service.
Guwahati serves as the Northeast's hub for fabrication, kitchen equipment, trading, interiors and signage. 304 and 316 in 2B and No.4 finishes dominate contact and equipment surfaces there, and for the region's growing hotel, showroom and tourism projects, PVD colour, mirror and etched designer finishes get specified for façades and lobbies. Sikkim's pharmaceutical belt, centered around Gangtok and Rangpo, ranks among India's notable formulation clusters; it runs on hygienic 316L and 304 for clean-room equipment, vessels and contact surfaces. Food, rice and beverage processing across the valley relies on 304 and 316L. Cost-sensitive work in utensils, hardware, furniture and signage, meanwhile, leans on 202, J4 and 204Cu circles and sheet. High-humidity, high-rainfall conditions across the hill states push architectural and railing work toward 316 too, wherever coastal-style atmospheric corrosion becomes a concern. We name these belts only at the level we're sure of, and we hold no local premises in any of them. The material itself is genuine Jindal, dispatched from Delhi.
Cities and states we serve in Assam & the Northeast
We ship to every district in Assam and every state across the Northeast, all out of Delhi. For the region's main hub, we've put together a dedicated guide with local cluster detail and an honest delivery band:
- Guwahati, the Northeast's commercial capital: wholesale steel trading, fabrication, kitchen equipment, hospitality, interiors and signage.
Dibrugarh, Tinsukia, Jorhat, Silchar, Tezpur, Nagaon and Bongaigaon in Assam follow the same approach, as do Shillong in Meghalaya, Dimapur and Kohima in Nagaland, Imphal in Manipur, Agartala in Tripura, Aizawl in Mizoram, Itanagar in Arunachal Pradesh and Gangtok in Sikkim. No lateral branch claims here. Just genuine Jindal stock, dispatched straight from Delhi to your location. For our other state and city guides, check the full locations index.
Dispatch & logistics to Assam & the Northeast
699, 1st Floor, Gali Kundewalan, Ajmeri Gate, Delhi 110006, that's the address of our Ajmeri Gate base, and every material dispatch leaves from there by road. The Siliguri corridor is the only route connecting the Northeast to the rest of the country, so all shipments funnel through it. This is the farthest band we serve, and the terrain adds real time to the journey. Honest road transit runs 5–7 days to Guwahati and the Brahmaputra valley (roughly 1,850–2,000 km). Getting to the interior hill states, Nagaland, Manipur, Mizoram, Tripura and Arunachal Pradesh, takes 6–8 days. Sikkim is reached via Siliguri too, but it sits nearer the front of that band.
Exact timing depends on the transporter, the load, the weather and how the finish is protected. Part-loads get consolidated with other despatches heading east, while full loads move direct. Freight is quoted ex-Delhi or freight-to-pay and gets confirmed on the RFQ. Sheets are edge-protected for finish-sensitive orders, such as mirror and PVD work. Every dispatch carries a mill test certificate tying the material back to its JSL-melted heat and grade. A proper GST tax invoice is raised on each sale, and the e-way bill for the inter-state movement from Delhi gets generated with the dispatch.
| Item | How it works |
|---|---|
| Dispatch origin | Ajmeri Gate stock point, Delhi (no local Northeast premises) |
| Road transit, Brahmaputra valley | Typically 5–7 days to Guwahati, Dibrugarh, Jorhat, Silchar (~1,850–2,000 km) |
| Road transit, hill states | Typically 6–8 days to Nagaland, Manipur, Mizoram, Tripura, Arunachal; Sikkim via Siliguri is nearer |
| Freight | Ex-Delhi or freight-to-pay, confirmed on the RFQ |
| Documents | Mill test certificate + GST tax invoice + e-way bill with every dispatch |
| Cut-to-size | Shearing / cut-to-size and PVD, mirror & perforation as job-work on Jindal base |
Recommended grades by Assam & Northeast industry
Grade choice in this region tracks its mix of tea, refining, pharmaceutical, food, fabrication and hospitality industries, so the table below lines up each main industry with a recommended grade and finish. Composition and mechanical values come from standard published data under ASTM A240 and IS 6911, verified on the MTC. We don't repeat them here.
| Industry | Recommended grade / finish | Grade page |
|---|---|---|
| Assam tea estates & processing | 304 food-contact, 2B / No.4 | SS 304 · SS 316 |
| Digboi / Numaligarh / Bongaigaon / Guwahati refineries & petroleum | 316L; duplex 2205 for aggressive service; plate | SS 316L · Duplex 2205 |
| Sikkim pharmaceutical & clean-room equipment | 316L / 304, 2B hygienic | SS 316L · SS 304 |
| Namrup fertilizer & process plants | 316L; 321 for elevated-temperature service | SS 316L · SS 321 |
| Guwahati fabrication, kitchen equipment & food | 304 general; 430 brightwork; 316L food-contact | SS 304 · SS 430 |
| Hospitality, interiors & signage | 304 with PVD, mirror & etched finishes | SS 304 · PVD colour |
| Utensils, hardware, furniture & signage | 202 / J4 / 204Cu circles & sheet | SS 202 · Jindal J4 · 204Cu |
Verify-list grades (317L, 304H, 321H, 301LN, 444, duplex 2304, super duplex 2507 and JSLU DD/SD) aren't held as routine stock. They move against indent or on request instead, so send the specification with your RFQ and we'll confirm availability against indent. Choosing the right grade isn't always obvious. The SS 304 vs 316 guide walks through the food-contact and corrosion call that comes up constantly in the region's tea, refinery and pharma work. Buyers weighing utensils and hardware against cost will find the SS 202 vs 304 guide useful for sizing up the economy option, and the full grades chart covers the entire range.
Why buy from an MoU partner vs local bazaar stock
Relinox holds an authorized MoU partnership with Jindal Stainless Limited (JSL). Not Jindal SAW, not JSW Steel, not Jindal Steel & Power, and not a SAIL or Salem Steel distributor. Those are separate companies, mostly carbon steel and pipes. Our business is stainless flat products only. That distinction carries real weight in a region served by a single road corridor, where re-rolled and mixed-origin sheet moves through the market and origin is tough to prove.
- Genuine JSL-melted material through an authorized channel: the origin your MTC can actually prove, not unverified bazaar stock.
- Mill test certificates with every dispatch, showing grade and conformance per ASTM A240 / IS 6911. Ask for a sample copy against your indent.
- Full grade range from one source: austenitic, ferritic, martensitic, 200-series / J-series and duplex 2205. A mixed Northeast order ships together on one invoice, and that matters since every consignment has to make the long corridor haul.
- Honest logistics: genuine Delhi stock, a transparent 5–7 day valley / 6–8 day hill-state road band and freight, GST tax invoice and e-way bill. No inflated claims of a local branch.
Sub-dealers and resellers throughout the region are welcome to raise a dealer pricing enquiry on that same RFQ. Need a national benchmark on ss 304 sheet price per kg in assam? Check the dated current SS sheet price list. The page confirms the delivered Northeast figure on request, too.
Frequently asked questions
Who are the genuine stainless steel suppliers in assam?
Relinox Stainless is an MoU partner of Jindal Stainless Limited (JSL). We supply genuine JSL-melted sheets, plates, coils, patta and circles to every district of Assam and across the wider Northeast, operating out of our Delhi base at Ajmeri Gate. Each consignment comes with a mill test certificate, so the material can be traced straight back to its heat and grade.
Do you deliver to other Northeast states beyond Assam?
Yes. Beyond Guwahati and the districts of Assam, we also dispatch to Meghalaya, Nagaland, Manipur, Mizoram, Tripura, Arunachal Pradesh and Sikkim, covering Shillong, Dimapur, Imphal, Agartala, Aizawl, Itanagar and Gangtok. Same served-area model throughout. Genuine Jindal stock is held in Delhi and delivered straight to your site.
What is the delivery time to Assam and the Northeast?
Material dispatches by road from Delhi through the Siliguri corridor. Transit is typically 5–7 days to Guwahati and the Brahmaputra valley (about 1,850–2,000 km) and 6–8 days to the interior hill states, with Sikkim nearer the front of that band. Confirm the current lead time for your grade and quantity on the RFQ.
Are you a Jindal Stainless distributor in Assam and the Northeast?
Yes. Relinox holds an authorized MoU partnership with Jindal Stainless Limited (JSL) for stainless flat products. It's the jindal stainless distributor assam northeast buyers turn to for genuine material, a distributor and stockist of JSL flat products, not the mill that melts the steel.
Do you have a branch, office or stock point in Assam or the Northeast?
No. We hold no office, branch or warehouse anywhere in the region. Our stock stays at the Ajmeri Gate base in Delhi, then moves out to your Northeast location. That's what keeps the material genuine Jindal, with the origin traceable on the mill test certificate.
Which grades do Assam and Northeast buyers order most?
Tea estates and food processors across Assam rely on 304. Down at the Digboi, Numaligarh, Bongaigaon and Guwahati refineries, petroleum contractors need something tougher: 316L and duplex 2205 with plate. Sikkim's pharmaceutical plants stick with 316L and 304. Namrup's fertilizer and process operations call for 316L and 321. In Guwahati, fabrication shops, kitchen equipment makers and the hospitality trade favor 304 and 430, often finished in PVD. Utensils and hardware, meanwhile, are built from 202, J4 and 204Cu. The full breakdown is in the grades chart.
How is GST and the e-way bill handled for Northeast orders?
Every sale carries a proper GST tax invoice, issued under our GSTIN, 07AAYFR6664H1ZD. For inter-state shipments from Delhi to Assam or elsewhere in the Northeast, the e-way bill goes out with the dispatch, not after. So your inward documentation's already sorted by the time the goods arrive.
How do I verify the sheet is genuine Jindal?
Our authorization as a Jindal Stainless MoU partner, paired with the mill test certificate, is what backs this up. The MTC ties each sheet to JSL-melted heat and grade. Re-rolled bazaar stock can't make that claim. Want to check yours? See our guide to identifying real SS 304.
What is the ss 304 sheet price per kg in assam?
We don't quote a fixed figure here, since rates shift with the market. Check our dated indicative price list for the current band; the delivered Assam or Northeast rate, freight from Delhi included, gets confirmed on the RFQ against your grade, size and quantity.
Related links
- Cities in the region: Guwahati · all locations.
- Products: our stainless steel range includes sheets, plates, coils, patta / patti, and circles.
- Grades & guides: start with the grades chart if you're unsure what you need, or jump straight to SS 304, SS 316L, duplex 2205, SS 430, and SS 202. Trying to decide between 304 and 316? Our SS 304 vs 316 guide walks through it, and the current price list is right there too.
- Coverage & trust: customers can reach us through our Delhi (Ajmeri Gate) dealer, and every supply runs on our Jindal Stainless MoU partnership. We back each order with quality & mill test certificates, so when you're ready, request a quote with MTC.
Get today's rate
Send your requirement once, we reply the same working day with today's rate, availability and dispatch time. Mill test certificate with every dispatch. GST invoice on every sale.