Jindal SS 202 Sheet Price per Kg: Indicative Rate List India (2026)
SS 202 sheet in India sells by the kilogram, and today's indicative Jindal 202 ₹/kg rates by thickness sit in the table below. Treat that as a ballpark figure, not a locked quote; always confirm the live rate on RFQ. The stainless steel 202 price for cold-rolled (CR) 2B sheet runs in an indicative ₹135–180/kg band, depending on gauge. Thinner sheet carries a premium, and the per-kg rate eases off as thickness climbs. SS 202 goes by several names too: ss202, 202 stainless steel, AISI 202, or UNS S20200. It's a low-nickel 200-series Cr-Mn austenitic grade, which explains why the ss 202 sheet price per kg comes in under nickel-heavy 304. Whatever term the trade uses, be it the 202 stainless steel sheet price, the stainless steel 202 price per kg, the 202 chadar rate, the 202 grade steel price, the jindal ss 202 sheet price list, or a plain CR, 2B or BA sheet inquiry, the figure you land on is the same per-kg number shown here. Confirm it live when you request today's confirmed 202 rate.
Reviewed by the Relinox Technical Team. Relinox Stainless is a Jindal Stainless MoU partner / authorized channel supplying genuine JSL-melted 202, not re-rolled bazaar stock, so these rates track real trade levels rather than a stale trader PDF.
> "Jindal" here means Jindal Stainless Limited (JSL): 202 flat products from the Hisar and Jajpur mills. This page does not cover Jindal SAW, Jindal (India) Ltd, JSW Steel, or Jindal Steel & Power (JSPL); those make carbon steel and pipes, not flat stainless. We never distribute SAIL Salem stainless either.
SS 202 sheet price per kg today (indicative rate list)
This is the head 202 ss sheet price per kg in india table: cold-rolled (CR) sheet in 2B finish, covering the most-asked ss 202 sheet rate today and stainless steel 202 price per kg today queries. It answers the canonical ss 202 price per kg today, 202 stainless steel price per kg today, and ss 202 sheet price today / aaj ka rate searches at a directional level only; the exact figure isn't final until RFQ confirms it. This HTML table doubles as a jindal 202 sheet rate list and 202 price chart you can read and cite directly, not a jindal ss 202 sheet price list pdf or an image buried behind a download.
| Grade (CR sheet, 2B) | 0.5–0.8 mm (₹/kg) | 1.0–1.2 mm (₹/kg) | 1.5–3.0 mm (₹/kg) |
|---|---|---|---|
| SS 202 | ₹145–180 | ₹138–172 | ₹135–168 |
* Prices are dynamic in nature. Please contact us for live price based on your requirement. Rates track nickel, see why prices move. Call/WhatsApp +91 98992 66222.
Indicative Delhi market range, reviewed October 2026. Stainless rates move daily with nickel/LME, confirm today's exact rate on RFQ. Basis: ex-Delhi; GST & freight extra; no minimum order, larger quantities get better rates; cut-to-size on request at additional charges.
The jindal ss 202 sheet price and jindal 202 sheet rate match the generic rate given above. This is genuine JSL material, sold through an authorized channel, with a mill test certificate. Want something cheaper still? Jindal's economy J4, J1 and JT grades are quoted on request, and they generally sit a step below 202 on the price ladder. Request today's confirmed 202 rate to get the live per-kg figure along with MTC.
SS 202 sheet price per kg by thickness (0.5–4 mm)
Thickness is what sets the per-kg rate. The band below covers CR sheet in 2B finish; the gauge mapping follows the standard Indian-market mm↔gauge conversion (see SS sheet sizes & thickness).
| Thickness (mm) | Approx. gauge | Finish | Indicative ₹/kg |
|---|---|---|---|
| 0.5 mm / 0.8 mm | 26–22 g | 2B CR | ₹145–180 |
| 1.0 mm / 1.2 mm | 20–18 g | 2B CR | ₹138–172 |
| 1.5 mm / 2.0 mm / 3.0 mm | 16–11 g | 2B CR | ₹135–168 |
| 4.0 mm and above / plate | — | HR / plate | On request, see SS plate price |
* Prices are dynamic in nature. Please contact us for live price based on your requirement. Rates track nickel, see why prices move. Call/WhatsApp +91 98992 66222.
Indicative Delhi market range, reviewed October 2026. Stainless rates move daily with nickel/LME, confirm today's exact rate on RFQ. Basis: ex-Delhi; GST & freight extra; no minimum order, larger quantities get better rates; cut-to-size on request at additional charges.
The ss 202 0.5mm, 0.8mm, 1mm, 1.2mm, 1.5mm, 2mm and 3mm sheet price per kg each land in the band tied to their own row. Thinner gauge means a higher ₹/kg, every time. 4mm and anything heavier moves over to plate pricing, and that's quoted on request. Want the full cross-grade view, gauge by gauge? Check SS sheet price by thickness.
SS 202 price by finish (2B / No.4 / mirror)
Finish drives the rate. The ss 202 2b finish price serves as the base figure in the tables above, and polished and bright finishes typically carry a market adder over 2B. That's why the ss 202 no.4 finish price, along with the mirror-finish rate, sits above 2B by the deltas shown below (added to the grade rate).
| Finish | Typical adder over 2B | Typical use |
|---|---|---|
| 2B (cold-rolled, base) | Base rate | General fabrication, furniture |
| BA (bright annealed) | +₹8–18/kg | Appliances, bright interiors |
| No.4 / hairline | +₹10–22/kg | Kitchen equipment, railings |
| Mirror (No.8 / 8K) | +₹20–40/kg | Decor, signage, cladding |
| PVD colour / etched / designer | Quoted per job (base + finishing) | Architecture, interiors |
* Prices are dynamic in nature. Please contact us for live price based on your requirement. Rates track nickel, see why prices move. Call/WhatsApp +91 98992 66222.
Indicative Delhi market range, reviewed October 2026. Stainless rates move daily with nickel/LME, confirm today's exact rate on RFQ. Basis: ex-Delhi; GST & freight extra; no minimum order, larger quantities get better rates; cut-to-size on request at additional charges.
For how each finish is produced, see SS finishes explained.
SS 202 sheet weight & how to cost a sheet (8x4)
The rate gets quoted per kg first, then it's converted into a per-sheet figure by weight. Simple enough: an ss 202 8x4 sheet price is just the ₹/kg rate multiplied by that sheet's weight. Indian-market sheets come in three standard sizes: 8x4 (1250×2500 mm), 4x10 (1250×3050 mm) and 5x10 (1500×3000 mm). For 202, density sits at ρ ≈ 7.85–7.90 g/cm³, drawn from standard published data per IS 6911.
| Size (ft) | Size (mm) | How per-kg becomes per-sheet |
|---|---|---|
| 8x4 / 4x8 | 1250×2500 | ₹/kg × sheet weight (kg) |
| 4x10 | 1250×3050 | ₹/kg × sheet weight (kg) |
| 5x10 | 1500×3000 | ₹/kg × sheet weight (kg) |
* Prices are dynamic in nature. Please contact us for live price based on your requirement. Rates track nickel, see why prices move. Call/WhatsApp +91 98992 66222.
Both the ss 202 sheet weight per sheet and the 1250x2500 202 price trace back to the same per-kg rate. You multiply it by the ss 202 sheet weight per kg figure for that size, and that's it. Our weight calculator converts ₹/kg to price per sheet, or check the SS sheet weight chart instead.
What decides the SS 202 price (price factors)
The stainless steel 202 price per kg doesn't move for one reason. It's a stack of inputs, which is exactly why the rate shifts daily and why we date the table rather than freeze a number. Per ASTM A240 and IS 6911, 202 is a Cr-Mn 200-series austenitic grade, with far less nickel than 304. That means manganese and ferrochrome push its rate around more than nickel does. It's also the main reason 202 sits below 304 on the price ladder.
| Factor | Effect on ₹/kg | Note |
|---|---|---|
| Raw material (LME / ferro-alloys) | Alloy prices up → rate up | 202 is low-nickel Cr-Mn, so manganese & ferrochrome drive it more than nickel; rates still move daily with nickel/LME |
| Grade (200- vs 300-series) | 202 below 304/316 | Lower nickel makes 202 the economical austenitic choice |
| Finish | 2B < No.4 < mirror/PVD | See finish adders above |
| Thickness / gauge | Thin gauge → premium | Per-kg rate eases as thickness rises |
| Order quantity | More kg/MT → better rate | No minimum order; an ss 202 wholesale or bulk price per kg earns a keener number |
| Freight to your city | Farther → higher landed cost | Base rate same; landed cost varies by city |
| GST | Added on invoice | Rates quoted ex-GST, see HSN & GST below |
* Prices are dynamic in nature. Please contact us for live price based on your requirement. Rates track nickel, see why prices move. Call/WhatsApp +91 98992 66222.
The same per-kg logic carries across every form. Take an ss 202 patta or ask for 202 patti price per kg, it follows the grade rate above, priced to strip width. See SS patta / patti strips for the specifics. An ss 202 coil price per kg, on the other hand, tracks the sheet rate instead. For that, check stainless steel coils.
How we quote 202 (GST, HSN, freight, no MOQ)
Prices quoted are ex-Delhi, per kg. GST and freight aren't included; they're added to the invoice. There's no minimum order. Buy more, and the rate improves. Cut-to-size pieces are available on request, at an extra charge. 202 sheet falls under HSN Chapter 72, the iron and steel category. For the exact ss 202 sheet price per kg with gst, plus the HSN classification, check our SS sheet HSN & GST resource.
| Item | Classification | Detail |
|---|---|---|
| SS 202 sheet / coil / strip | HSN Chapter 72 (72xx) | GST added on invoice, see HSN & GST rate |
* Prices are dynamic in nature. Please contact us for live price based on your requirement. Rates track nickel, see why prices move. Call/WhatsApp +91 98992 66222.
Rates run about the same everywhere in India on a per-kg basis; the real variable is freight. That's why the ss 202 sheet price in delhi reflects the ex-Delhi base, whether you're buying in BA or CR finish, while the ss 202 sheet price in mumbai or any other city tacks on transport to arrive at the landed cost. If you're asking about an ss 202 sheet price in {city}, our stock point at Ajmeri Gate in Delhi (699, 1st Floor, Gali Kundewalan, Ajmeri Gate, Delhi 110006) ships pan-India. See SS sheet dealer in Delhi.
Is SS 202 cheaper than 304? (when to choose 202)
Yes, 202 comes out cheaper. Its 200-series Cr-Mn chemistry needs far less nickel than the roughly 8% found in 304, which keeps the ₹/kg down and shields it from swings in the nickel market. The catch is corrosion resistance, where 304 has the edge. That's why 202 suits dry, indoor settings (furniture, railings, modular-kitchen bodies, utensils) rather than wet or coastal service.
The full comparison with side-by-side figures sits at SS 202 vs 304: price & where each fits. Chemistry, magnetic behaviour and the complete property set for 202 are covered in SS 202 grade data.
Why buy SS 202 from Relinox
We are a Jindal Stainless MoU partner supplying genuine JSL-melted 202 flat products, not re-rolled bazaar stock, with mill test certificates (MTC) shared on dispatch and pan-India supply from our Delhi Ajmeri Gate stock point. Whether you search for an ss 202 dealer (or ss 202 dealer price / dealer near me), an ss 202 stockist (stockist price), an ss 202 supplier (supplier price), an ss 202 trader (trader price) or an ss 202 distributor / authorized distributor, they all resolve to the same authorized-channel pricing, genuine Jindal Stainless Limited (JSL) material, never SAIL Salem or carbon-steel "jindal pipes". We are a distributor and MoU partner of Jindal Stainless, never a manufacturer of the steel itself.
Resellers and sub-dealers are welcome. There's no minimum order. Ask about an ss 202 sheet price per kg wholesale rate, or come in with an MT-scale requirement, and you'll get a sharper figure either way. Send a dealer / bulk pricing enquiry via the RFQ form and we'll quote with MTC.
Related 202 & price pages
- Full stainless steel price list, all SS grade rates per kg
- SS 202 composition & properties, grade data (not price)
- SS 202 vs 304: price & where each fits
- SS 304 sheet price per kg and SS 316 sheet price per kg: see how the two grades stack up on rate.
- SS plate price per kg
- SS sheet price by thickness (0.5–12 mm)
- 202 patta / patti strip · 202 coil
- SS HSN & GST on sheets
- 202 kg-per-sheet chart · weight calculator
- Jindal economy J4 · Jindal J-series
- Our Jindal Stainless MoU partnership · Mill test certificates
- Request today's confirmed 202 rate
Indicative cost per 8x4 sheet (nominal 2500 × 1250 mm, SS 202 2B)
The band arithmetic done for you: ₹/kg range × sheet weight (~24.4 kg per mm of thickness for a nominal 8x4 sheet).
| Thickness | Sheet weight | Indicative cost / sheet |
|---|---|---|
| 1.0 mm | 24.4 kg | ₹3,350–4,200 |
| 1.5 mm | 36.6 kg | ₹4,900–6,200 |
| 2.0 mm | 48.8 kg | ₹6,550–8,250 |
| 3.0 mm | 73.2 kg | ₹9,850–12,350 |
* Prices are dynamic in nature. Please contact us for live price based on your requirement. Rates track nickel, see why prices move. Call/WhatsApp +91 98992 66222.
Indicative, arithmetic of the ₹/kg band × nominal 2500×1250 sheet weight; reviewed October 2026. * Prices are dynamic in nature. Please contact us for live price based on your requirement.
FAQ
What is the price of SS 202 stainless steel sheet per kg today?
SS 202 sells by the kilogram, and the exact rate shifts daily with nickel and the LME. The CR sheet (2B) falls within an indicative ₹135–180/kg band depending on thickness. That range was reviewed in October 2026. Check the dated table above, and confirm the live rate on the RFQ form before you commit to anything.
Is SS 202 cheaper than SS 304?
Yes, 202 is a low-nickel 200-series Cr-Mn austenitic grade. That's why it runs cheaper per kilogram than nickel-bearing 304, and it doesn't swing with the nickel market the way 304 does. See why 202 costs less than 304.
What thicknesses and sizes does SS 202 sheet come in?
Stock for SS 202 CR sheet usually runs from 0.3 mm up to 4 mm, in the standard sizes found across the Indian market: 8x4 (1250×2500 mm), 4x10 (1250×3050 mm), and 5x10 (1500×3000 mm). Anything at 4 mm or heavier shifts into plate territory, and that gets quoted on request.
Does the SS 202 price include GST?
No. Rates here are quoted ex-GST, and GST gets added on the invoice, along with freight. SS 202 flat products fall under HSN Chapter 72. For the current codes, check our SS HSN codes & GST rate page.
What is the minimum order for SS 202 sheets?
There's no minimum order quantity, and bigger orders earn better rates. Send your requirement through the RFQ form for a confirmed quote. Cut-to-size pieces are available on request, at additional charges.
Do you provide a mill test certificate (MTC) with SS 202?
Yes, the material conforms to ASTM A240 / IS 6911 as produced by Jindal Stainless, and a mill test certificate (MTC) comes with every dispatch. Read about our Jindal Stainless MoU partnership.
Is the material genuine Jindal Stainless?
Yes, Relinox holds a Jindal Stainless MoU partnership, which makes it an authorized channel. The products we supply are genuine JSL-melted 202 flat items, not re-rolled bazaar stock. We distribute Jindal Stainless Limited (JSL) material only. Jindal SAW, JSPL, JSW and SAIL Salem don't come into it.
How is the per-sheet cost of an 8x4 SS 202 sheet calculated?
Per-sheet cost comes from multiplying the ₹/kg rate by the sheet's weight: rate per kg × sheet weight in kg. Need the weight of an 8x4 sheet? Pull it from our weight calculator or the SS sheet weight chart.
Does SS 202 rust?
200-series 202 just doesn't hold up to corrosion the way 304 does. It's the better choice for dry or indoor work, not wet or coastal settings. For the details, see SS 202 grade data.
Can I get SS 202 delivered to my city?
Yes, we dispatch pan-India from our Delhi Ajmeri Gate stock point. The per-kg base rate is similar across India; only freight varies by city and distance.
Do you offer dealer or wholesale SS 202 pricing?
Yes, for resellers and bulk buyers, a wholesale or dealer enquiry earns a keener per-kg figure since larger quantities get better rates. Raise a dealer-pricing enquiry via the RFQ form and we will quote with MTC.
Is SS 202 magnetic?
SS 202 belongs to the 200-series austenitic family, and in its annealed state it's usually non-magnetic. Cold work can change that, though; slight magnetism tends to creep in. For the full note, see SS 202 grade data.
Get today's rate
Send your requirement once, we reply the same working day with today's rate, availability and dispatch time. Mill test certificate with every dispatch. GST invoice on every sale.